Provide In-Situ Entering and Leaving Water Temperatures, Pressures and on/off States Tests
Ewbank Geo Testing rents equipment to test, measure and verify the operation of a ground source heat pump. Ewbank has available data loggers that can be used during the start up of a unit(s) or to trouble shoot an installed unit(s).
A two channel data logger is available and is battery powered and records two channels of temperatures. The temperature probes are attached to the heat pump at the entering and leaving water connections. The data can be downloaded via a serial cable connection to other devices. While acquiring the temperatures the user can view both channels of data on the data logger without any other device.
A sixteen channel data logger is available to record, at one minute intervals, up to sixteen channels of a mixture of temperatures, pressures and on/off states.
Contact one of our experienced test providers to get these services.